 |
|
iglidur® online catalog with prices and range of products
Bearings of high performance plastics
Lower costs and raise service life by eliminating lubrication and lowering maintenance works, everything delivered from stock immediately - that is the core idea iglidur® polymers are tested in abrasion, friction and other material properties. They built the technological core of the igus® products. Polymer plain bearings from igus® signifies the step from the plastic bushing to the proven and tested, and thereby calculable and quickly available, machine element.
iglidur® product finder for the right plain bearing
You will find more accurate details about the suitability and service life of iglidur® materials in the iglidur® expert system.
iglidur® plain bearing materials
standard
Standard bearing, from stock
iglidur® G
The all-rounder
maintenance-free dry operation
High abrasion resistance
Insensitive to dirt and dust
Over 650 dimensions available from stock
cost effective
iglidur® W300
The endurance runner
For extremely high operating times in continuous operation
Low coefficient of friction
Extremely high abrasion resistance
Suited for rough shafts and stainless steel shafts
Dirt resistant
iglidur® J
The fast-and-slow motion specialist
Low wear against many shaft materials
Low coefficients of friction in dry operation
vibration dampening
Good chemical resistance
Best performance with soft shafts
Low humidity absorption
iglidur® X
The high-tech troubleshooter
For operating temperatures from
-100°C to + 250°C in continuous operation
Excellent resistance against chemicals
High compressive strength
Very low humidity absorption
Extremely wear resistant for the entire temperature range
iglidur® M250
Heavy and rugged
Excellent vibration dampening
Insensitive to misalignment
High impact strength
For greater wall thicknesses according to DIN 1850
Dirt can accumulate
More all-rounder
more bearings, from stock
iglidur® P
Precise and cost-efficient
Low water absorption
High load capacity
Cost-effective
Low wear rates
iglidur® GLW
Sturdy and low priced
Many-sided application at static load
Maintenance-free, self lubricating
Cost-effective
Insensitive to dirt
Insensitive to vibrations
iglidur® K
the durable AllrounderLubrication and maintenance-free
Lowest humidity absorption
wear-resistant
Cost-effective
iglidur® J4
low cost and low wearLubrication and maintenance-free
Low-cost-material for large volumes
Low coefficients of friction
Media resistant
Lowest humidity absorption
endurance run
iglidur® J3
runs 3x longer as iglidur® JLubrication and maintenance-free
Low coefficients of friction
Media resistant
Lowest humidity absorption
PTFE free
iglidur® R
Low coefficients of friction, low costs
Good abrasion resistance
Low coefficients of friction in dry operation
Very cost efficient
Lowest humidity absorption
iglidur® J260
the best on plasticLubrication and maintenance-free
Very good c.o.f. for low or medium loads
Media resistant
Slightly higher temperatures than with iglidur® J
Longer life time - even on polymer shafts and other special cases.
iglidur® J200
For anodized aluminum
Extremely high service life on anodized aluminum
Low adhesion factor
Low wear
For low to medium loads
iglidur® L250
For fast rotations
Specially made for fast rotating applications
Very low coefficients of friction
Excellent wear resistance
iglidur® D
Low coefficients of friction and low costs
Low coefficients of friction at high speeds
For low loads
Very cost efficient
vibration dampening
Lowest humidity absorption
High temperatures till 250°C
iglidur® X6
the new Nano material for high temperaturesLubrication and maintenance-free
Long term service temperature up to +250°C
Up to 50% better press fit as iglidur® X
High compressive strength
Very good chemical resistance
PTFE free
iglidur® V400
Wear resistant at high temperatures
Extreme wear resistance with soft shafts and in high temperatures up to 200°C
Excellent chemical resistance
High elasticity
iglidur® Z
The high-temperature material
Excellent wear resistance especially with high loads
High thermic stability
For extreme loads
Also for high surface speeds
Insensitive to edge loads
iglidur® UW500
Underwater bearings
For underwater application at high temperatures
For fast and continuous movements
High wear resistance, temperature to 200°C
iglidur® H
For wet areas
Usable underwater
Maintenance-free solution
For high temperatures
Chemical resistant
iglidur® H4
For the automotive industry
Low adhesion factor
Best wear-resistance
High temperature resistance
-40°C to 200°C
High resistance to chemicals
iglidur® H370
The most suitable one for wet areas
Wear-resistant - especially under water
High temperature resistance
-40°C to +200°C
High resistance to chemicals
iglidur® H2
Low-cost solution up to 200°C
Usable underwater
Cost-effective
Chemical resistant
For high temperatures
iglidur® H1
The continuous runner at high temperatures
High wear resistance in extreme ambient conditions
Very low coefficient of friction
High resistance to temperature and chemicals
For applications in the engine compartment
Special applications
iglidur® Q
Fit for high loads
Excellent abrasion resistance, especially with high loads
Suitable for extreme p x v values
Good coefficients of friction
Insensitive to dirt
iglidur® B
Highest vibration dampening
Sound isolation
Extremely high elasticity
Potential sealing function
iglidur® F
The lightning arrester
Electro-conductive
High compressive strength
Good temperature resistance
High p x v value
Good chemical resistance
iglidur® C
Free of PTFE and silicon
Silent operation
Good abrasion resistance
Maintenance-free solution
iglidur® UW
Underwater bearings
For underwater applications
For fast and continuous rotations
High holding times
contact with food
iglidur® A180
Delicious
The iglidur® A180 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA)
For direct use in the vicinity of (or in contact with) food or drugs
For wet areas
iglidur® A290
Delicious
Complies with the specifications of the BfR
Suitable for the direct contact with food and drugs
Good abrasion resistance
Silent operation
iglidur® A200
Delicious
The iglidur® A200 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA)
For direct use in the vicinity of (or in contact with) food or drugs
For low speeds
iglidur® T220
For the tobacco industry
Free from undesirable and banned ingredients of the tobacco industry
iglidur® A500
Specialist in the food sector
The iglidur® A500 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA)
For direct use in the vicinity of (or in contact with) food or drugs
Resistant to temperature from -100°C to + 250°C
Extremely high resistance to chemicals
New materials 2010
More iglidur® products, off the shelf
iglidur® PRT
Polymer slewing ring bearing
Absolutely maintenance-free
Simple installation and replaceable gliding elements
High wear resistance
For very high loads and high stiffening
Stainless steel versions available
Extensive accessories
xiros® plastic ball bearing
Maintenance- and lubricant-free
High corrosion-resistance
For temperatures up to 150°C
Special models
Materials in different models iglidur® clip bearings
iglidur® clips2
Low bearing clearance, very accurate, easy installation with slanted slot, material: iglidur® M250, maintenance-free and predictable service life
iglidur® MKM - Double flange bearings
Press fit, axial bearings on both sides, tolerance compensation of the plate thickness, easy assembly, axial pretension
iglidur® MDM - Double flange bearings
Large flange surfaces, undetachable after e-coating, symmetrical flange, easy installation
iglidur® JVSM/JVSI
Fully clearance-free in unloaded state, material: iglidur® J, maintenance-free and predictable service life
iglidur® JVFM
Clearance-free pretensioned bearing, fully clearance-free in unloaded state, material: iglidur® J, maintenance-free and predictable service life
iglidur® flange bearings
Excellent abrasion resistance, maintenance-free dry operation, material: iglidur® G, iglidur® A180, iglidur® J and iglidur® X, lightweight
iglidur® PEP
Use irrespective of shaft surface and material, very low priced, easy installation, low friction coefficient
Polysorb
Compensation of axial clearance and manufacturing tolerances, vibration compensation, noise dampening
iglidur® JATM/VATM
Maintenance-free plain bearing system, for high performances, defined glide pairing, predictable service life
iglidur® sealing lip bearings
Polymer bushing with clipped-on radial shaft seal, sealing for rotating shaft, reduced installation space, as well as quick and easy installation
51 Caswell Road
Brackmills
Northampton
NN4 7PW
igus® contactTel: +44(0)1604 677240
Fax:+44(0)1604 677242 Send e-mail to igus®
3D-CADOnline catalogNews 2010Product finderProduct finder for semi-finished productsLifetime calculationApplication examplesEmail the product expertInquiry/orderQuickSpecPart No. searchShaft inquiryCatalogs/samplesDownloadmanus® Competition
More than 80,000 products available! Delivery and consultation Mon-Fri from 8am-8pm and Sat from 8am-12pm!
Terms and Conditions Imprint
